Favorite Vehicles From Overland Expo East

Our Drive The Globe Unimog got some attention from Outside Magazine & GearJunkie at the Overland Expo East 2018. Check out the articles below as well as the other cool rigs from the event.

Photo By Bryon Dorr

The Unimog & Overland Expedition Camp Trailer Match!

They match! The Mercedes Unimog & the new overland expedition camp trailer are a matching pair. In this episode we check out the completed exterior and talk about the new hardware mounted to the front tongue hitch area. Follow this series as we continue to outfit the interior in the quest to create the ultimate off road camp trailer.

Subscribe To Our Channel Here:

Happy New Year 2018 | New Video Posted

New Video On DTG TV!

As we close out 2017 we are experiencing a brutal sub zero cold freeze here in the North East United States. I get many questions about the Unimog, and recently a number of them have involved the cold weather and its suitability for Arctic adventures. Just how good is "that truck" in the freezing weather?  Well, to close out 2017 here is a short video that answers at least part of the question. Will it start? 

Happy New Year, all the best for 2018 and most of all we wish you safe & happy adventures!

Mercedes Unimog - A Walk Around Video

Drive The Globe - 1979 Mercedes Unimog Walk Around - Overland Expo East 2017

The following video was filmed at the 2017 Overland Expo East at the Biltmore Estate in Asheville North Carolina by Jason Koertge of Swell Runner Overland. 

Jason, and Drive The Globe's Michael Ladden cover the Unimog from bumper to bumper and show why this vehicle is unique and adventure ready.

A big thank you to Jason for this awesome video. Be sure to check out his other work at:


Back To The Drawing Board - Some Redesign Needed On Unimog

Our Expedition Unimog completes its maiden voyage. A few changes are in store.

Every new expedition vehicle needs to start somewhere. No matter what you do there is always the first trip. Working out the kinks as they say. Most times I have found you come home with a number of changes that need to be made before the next adventure. Sometimes there are minor things, occasionally they are major.

Our last update on our expedition vehicle project showed a shiny new completed vehicle ready for her first such journey. Although I know that I owe everyone several articles accounting for some of our unique creations and modifications on the truck, I am going to skip forward for one post and cover the failures and the shortcomings of our project. Specifically, one major problem that nearly ended our trip only several days in.

Most importantly, I would like to begin by thanking the many people that jumped in to aid us in our time of need- and I mean need. As often is the case, we broke down at precisely the worst possible location- in the middle of nowhere, on a Sunday and with really no idea who to call for help. We were greeted by many people who pulled to the side of the road to offer a hand (in fact nearly everone driving by offered to assist). A big Thank You to all of you (you know who you are), and an extra special HUGE THANKS to Eugene and Connie Joy who simply were passing by. They stayed for hours, helped right the rear body, assisted in phoning the local authorities and checked in with us the following day to make sure that we got a “BIG LAND” welcome to Labrador. 

So just what did happen? Well, after hours of bumping about on the rough gravel and pot holed road from Baie Comeau Quebec on the way to Labrador City my concentration toward the road ahead was broken by the CB radio. Dennis, with an urgency in his voice said, “Mike, you are loosing your back- pull over!”  “Huh”, I thought. I looked in the rear view mirror and saw the rear body of the truck looking like a dump truck in full tilt mode. Uh, oh- I don’t have a dump truck!

Long story real short. I will take some negative credit for a bit of a design flaw. With the spare tire, weighing in at nearly 260 pounds, and a very overloaded truck there was too much weight- specifically too much weight too far toward the rear of the truck. The welds holding the rear body to the frame had let go. Later we found that none of the welds were related to any of the work we had done on the vehicle, in fact they were all factory welds and two of them were defective from new.

One of my revelations from the incident was this: In the States if I had a million dollars and 2 weeks I probably could not have gotten the truck fixed in time. In Labrador we managed to  (with the help of many, and special thanks to GSC Crane Operation) get a tractor trailer tow back to the weld shop. Get a crane to lift the back body off. A welder to fix all of the weld points and strengthen the supports. Repair the wiring and exhaust damaged in the incident and lift the body back on. All of this in six hours- yes, six hours. Oh, and did I mention, on a Monday morning after getting towed in at 3am. Oh, and one more thing- without any electric power in the shop- in fact without any electric power in the whole town! Amazing.

An experience certainly, but one that we won’t forget because of all the great people that we met.

Thank you all from Mike, Karen, Dennis and Maura!  - And now the photos. (Click To Enlarge)